Comp-Style Bull Bar Front Bumper for RC4WD C2X

$53.95 USD

ScalerFab's RC Scale Welded Steel Ultra Low-Profile Comp-Style Front Bumper for RC4WD C2X w/ Mohave Body.

Specifications:

- Approx. 82mm wide with 5mm raised brackets
- Bumper fits tight to the frame for the best approach angle possible.
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Flat Black: not as susceptible to chips

-Rustoleum Truck Bed Coating: easier to touch up using a can of Rustoleum Truck Bed Coating, available at Home Depot or Lowes.

-Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own.

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

Name: Comp-Style Bull Bar Front Bumper for RC4WD C2X
Brand: Element RC
Price: 53.95 USD
Availability: InStock

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Comp-Style Bull Bar Front Bumper for RC4WD C2X

Narrow Winch Front Bumper with Trail Bar for RC4WD C2X

$58.95 USD

ScalerFab's RC Scale Welded Steel Narrow Winch Front Bumper with Trail Bar for RC4WD C2X w/ Mohave Body.

Specifications:

- Approx. 115mm wide with 5mm raised brackets
- Some fore/aft adjustment
- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern)
- Mounts using existing holes in frame (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Flat Black: not as susceptible to chips

-Rustoleum Truck Bed Coating: easier to touch up using a can of Rustoleum Truck Bed Coating, available at Home Depot or Lowes.

-Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own.

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Narrow Winch Front Bumper with Trail Bar for RC4WD C2X

Prerunner Series RC4wd C2X Front Bumper

$73.95 USD

Our most popular series has made it to the RC4WD C2X!

The Prerunner series was designed for a combination of looks and performance under scale use. Made from 3/16" rod, the Prerunner Front Bumper for the C2X is a low-profile, scale trail armor option.

Full-size Steel, welded Prerunner Series Front Bumper

for the RC4WD C2X with Mohave Body

Specifications:
- Approx. 165mm wide with 5mm raised brackets
- Mounts using existing hardware
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: not as susceptible to chips

-Rustoleum Truck Bed Coating: easier to touch up using a can of Rustoleum Truck Bed Coating, available here: link text

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Prerunner Series RC4WD Marlin Crawler TF2 Rear Bumper

$59.95 USD

Get the best departure angle possible with the ScalerFab steel Prerunner Series Rear Bumper for RC4WD Marlin Crawler Trail Finder 2!

Specifications:-
-180mm overall width
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame. Does not mount like stock bumper. Requires removal of rear mounting bracket.
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

ALTTAGS: Trailfinder

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Prerunner Series RC4WD Marlin Crawler TF2 Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Prerunner Series RC4WD TF2 Rear Bumper

$59.95 USD

Get the best departure angle possible with the ScalerFab steel Prerunner Series Rear Bumper for RC4WD Trail Finder 2!

Specifications:-
-180mm overall width
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame.
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

ALTTAGS: Trailfinder

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Prerunner Series RC4WD TF2 Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

RC4WD C2X Rock Sliders (Skid Plates available)

$47.95 USD

RC4WD C2X Rock Sliders w/ Optional Skid Plates

Steel Rock Sliders made specifically for the RC4WD C2X.

Specifications:
-Approx. 175mm long x 40mm angled offset (Front slightly shorter than body to avoid rubbing when at full turn/compression)

-Angled to raise to body line

-Mounts by screwing 4 button screws into the underside of the sliders. (hardware not included) - see photos

-Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Flat Black: not as susceptible to chips

-Rustoleum Truck Bed Coating: easier to touch up using a can of Rustoleum Truck Bed Coating, available at Home Depot or Lowes.

-Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

RC4WD C2X Rock Sliders (Skid Plates available)

RC4WD TF2 Construction Rack

$40.00 USD

Protect your rig and look cool doing it! This is the brand new, just released ScalerFab RC4Wd TF2 Construction. Simple, yet strong and full of SCALE!

ScalerFab RC4WD TF2 Construction Rack

Specifications:
*Some Pictures Depict Optional Add-Ons
-Hand-welded steel 3/16 rod
-Mounts by drilling 4 holes into truck bed, hardware not included. (*Requires four (4) 3mm x 8mm screws w/ nuts.)
**NOTE: Spare Tire Carrier clearance is approx. 45-50mm from the bed. Larger tires may need to be squished to bolt on rack.

ALTTAGS: Trailfinder

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

RC4WD TF2 Construction Rack - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

RC4WD TF2 Double Bar Rock Sliders

$54.95 USD

RC4WD Trail Finder 2 (TF2/TF2 LWB) Double Bar Rock Sliders

Steel Frame-mounted Double Rock Sliders for RC4WD Trail Finder 2 Mohave, Marlin, and LWB Mojave bodies.

*Main bar approx. 160mm long x 45mm offset from frame rails (LWB approx. 185mm x 43mm offset)

*Mounts using existing holes in frame (hardware not included) - see photos

* Steel construction - Hand Made/Welded.

ALTTAGS: Trailfinder

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: not as susceptible to chips

-Rustoleum Truck Bed Coating: easier to touch up using a can of Rustoleum Truck Bed Coating, available here: link text

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

RC4WD TF2 Double Bar Rock Sliders - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Amazing Armor

I love these sliders! The build quality is amazing, they work even better than they look and they are super easy to install! Will for sure buy again!

Double bar sliders

These rock sliders are amazing! Fit and finish are spot on.

custom rock slider

I like it. It fits great. Just what I was shooting for. Thank you.

RC4WD TF2 Roll Bar

$35.00 USD

Protect your rig and look cool doing it! This is the brand new, just released ScalerFab RC4Wd TrailFinder 2 Roll Bar. Simple, yet strong and full of SCALE! Choose from this standard Roll Bar, or our Baha/Prerunner-style (full bed length) available HERE.

*Construction Rack in picture offered as a separate product HERE.

ScalerFab RC4WD Trail Finder 2 Roll Bar- See pics for measurements

Specifications:
**Some Pictures Depict Option Add-Ons
-Hand-welded steel 3/16 rod
-Mounts by drilling 4 holes into truck bed, hardware not included. (*Requires four (4) 3mm x 8mm screws w/ nuts.)
**NOTE: Spare Tire Carrier clearance is approx. 45-50mm from the bed. Larger tires may need to be squished to bolt on roll bar.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

RC4WD TF2 Roll Bar - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

TF2 Standard Rock Sliders

$42.95 USD

RC4WD Trail Finder 2 (TF2/TF2 LWB/Marlin Crawler) Standard Rock Sliders

Steel Frame-mounted Standard Rock Sliders available for RC4WD TrailFinder 2 Mohave, Marlin and LWB Mojave.

*approx. 160mm long x 45mm offset from frame rails (LWB approx. 185mm x 43mm offset)

*Mounts using existing holes in frame (hardware not included) - see photos

* Steel construction - Hand Made/Welded.

ALTTAGS: Trailfinder

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: not as susceptible to chips

-Rustoleum Truck Bed Coating: easier to touch up using a can of Rustoleum Truck Bed Coating, available here: link text

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

TF2 Standard Rock Sliders - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Solid Sliders

I'm happy with the look and short term use of the product so far. Its nice having a single tube slider to look a little different than most options out there. Installation was easy enough mounted with 12mm M3 and nyloc nuts.

As advertised. We'll, fabbed and quality materials.

All Products

Lifetime Warranty Info

Lifetime Warranty Info

Customer Reviews

Lifetime Warranty Info

Customer Reviews

Lifetime Warranty Info

Customer Reviews

Lifetime Warranty Info

Lifetime Warranty Info

Customer Reviews

Lifetime Warranty Info

Customer Reviews

Lifetime Warranty Info

Customer Reviews

Lifetime Warranty Info

Customer Reviews

Lifetime Warranty Info

Customer Reviews

Promos

DIY Bungee Cord Tutorial

Collaborate with Us!